Perreaux 200 MkII, Руководство пользователя

Страница: 31 / 35

30
13 13 13 13
Specifications
The 200 MkII specifications are detailed in brief and then subsequently in more
detail. In the detailed version, we attempt to explain the significance of each
specification.
The correlation between published specifications and sonic quality can be
unreliable. A list of numbers reveals virtually nothing. All technical
measurements must be subject to qualitative as well as quantitative
interpretation. Measurements of the 200 MkII reveal excellent results by any
standards. Tested at 115V and 230V after a 10 minute warm up period.
Specifications
In Brief
Rated Power Output: .................................................................. 200W
RMS
into 8Ω
(continuous, per channel, both channels driven from 20Hz-20kHz at < 0.020% THD)
................................................................................................. 300W
RMS
into 4Ω
(continuous, per channel, both channels driven from 20Hz-20kHz at < 0.035% THD)
Frequency Response:........................................................20Hz – 20kHz, ±0.25dB
Total Harmonic Distortion
(THD+N)
Typically:.....................................................................0.004%, @ 1kHz into 8Ω
20Hz to 20kHz: ....................................................................... <0.020%, into 8Ω
Voltage Gain:............................................................................................... 28.5dB
Dynamic Headroom
(rated with music)
: ............................................................>1.9dB
Voltage Swing: ........................................................................................... 160V
p-p
Maximum Current Output: ........................................................... 24A per channel
Damping Factor: ................................................................... 500, @ 1kHz into 8Ω
Signal to Noise Ratio
Rated Output
(unweighted)
:.............................................................................. 95dB
Input Sensitivity: ....................................................................................... 1.5V
RMS
Input Impedance: ............................................................................................22kΩ
Smoothing Capacitance: .......................................................................... 22,400µF
(11,200µF per channel)
Driver Stage:............................................................................................... Class A
Output Stage: ........................................................................................Class A/AB
Audio Inputs: ...................................................................... 1 pair RCA connectors
Audio Outputs: ....................................... 2 pair speaker binding posts per channel
Other Connections
1 x IEC AC mains input receptacle
Power Consumption
Idle ................................................................................................................... 80W
Maximum ...................................................................................................... 700W
(at 4Ω rated output)
Mains Input Voltage
100V, 110V, 120V, 220V, 230V or 240V AC at 50Hz or 60Hz
(Set within the 200 MkII at time of manufacture)