16
Copyright© 2017 by PeroWorx LLC
At this point it’s time to turn on the machine and click the connect button.
We open up the control tab and home the machine with the home axis button
Now we are ready to start the print. Click the start print button
and wait
for the printer to finish the print.
When the printing is done it is time to remove the model from the build table. Undo
the platform fixing knob on top and use an art knife or something similar to slowly
remove the model from the platform. At this point the print process is complete.
You have successfully printed your first part. But there are two optional steps you
can take after printing to make your parts stronger (harder) and better:
1.
Wash your part thoroughly with 95% ethanol to remove all excess resin
residue from your printed part and let it air dry for a few hours
2.
When your part is completely dry you can use an UV light box to completely
harden the part and improve its mechanical and visual properties (we also
supply the UV light box so should you want to buy it please send us an email
to
)
