Permobil M5 Corpus Скачать руководство пользователя страница 172

Страница: 172 / 280

User’s Manual Permobil M5 Corpus

Manual brake release

Figure 136. Release lever location.

The wheelchair is fitted with one or two manual brake releases
acting on the magnetic wheel locks to allow manual movement of
the wheelchair.

WARNING!

Wheel locks

Do not release or engage the wheel locks unless power to the wheelchair is
off.

To prevent the wheelchair rolling away, make sure it is on a level surface
before releasing the wheel locks.

Be aware that the wheelchair has no brakes when the wheel locks are in
free-wheel position.

Make sure that the person pushing the wheelchair has full control when the
wheel locks are released.

Always engage the wheel locks after the wheelchair has been pushed
manually.

172

Содержание M5 Corpus

























































































































































































































































































Результаты поиска

Содержание M5 Corpus

Отзывы:

Permobil M5 Corpus, Руководство пользователя, Страница: 172 / 280

Результаты поиска

Содержание M5 Corpus

Отзывы: