Permobil Corpus 3G, Руководство по обслуживанию

Страница: 20 / 45

21
The adjustment bar brackets are each held in
place by two screws
7. Loosen the screws on the left and right side of
the backrest profile and then remove its end
cover by sliding it straight out.
8. Remove the adjustment bar brackets, which
are each held in place by two screws. See the
illustration at bottom left.
9. Screw the adjustment bar down far enough to
be able to prise it up out of the groove on the
backrest profile. See the illustration at bottom
right.
The end cover of the backrest profile is secured
using one screw on the left side and one on the right
6. Remove the backrest profile, which is secured
using two screws on the left and right. See the
illustration. Remove by undoing the screws
and pulling the backrest profile straight up.
The backrest profile is secured using two screws
on the left and right
Screw the adjustment bar down far enough to
be able to prise it up out of the groove on the
backrest profile
Replacing the armrest height adjustment mechanism Repairs