Permobil ConnectMe M400 Скачать руководство пользователя страница 79

Страница: 79 / 110

Owner´s Manual Permobil M400

Handling

Manual Release of the Magnetic Wheel Locks

Location of the release levers.

Wheel lock released.

The wheelchair is fitted with a manual

brake release on each drivewheel that

can be released to make it possible

to move the wheelchair manually. The

brake release levers are located at the

front of the wheelchair.

Release the wheel locks

Shut off the wheelchair using the

start button on the control panel.

Move the levers outwards to release

the brakes. The chair can now be

moved manually.

Engage the wheel locks

Move the lever inwards so that it

assumes in its innermost position.

Always check that the release levera

goes right to its most inner position.

Wheel lock engaged.

Do not engage or disengage the wheel locks

unless power to the chair is off.
In order to avoid the wheelchair rolling away,

ensure that the wheelchair is on a level and dry

surface before releasing the wheel locks.
Be aware that the chair will not have brakes

when the wheel locks are in the free-wheel

position.
Make sure that the person pushing the chair

has full control when the wheel locks are dis-

engaged.
Always reset the wheel lock release after

manually moving the wheelchair.

WARNING!

When the wheel locks are released, the chair

will not drive. If it does, contact an Authorized

Permobil service center as soon as possible.

CAUTION!

Содержание ConnectMe M400















































































































Результаты поиска

Содержание ConnectMe M400

Отзывы:

Permobil ConnectMe M400, Руководство пользователя, Страница: 79 / 110

Результаты поиска

Содержание ConnectMe M400

Отзывы: