Permobil ConnectMe M400 Скачать руководство пользователя страница 62

Страница: 62 / 110

Owner´s Manual Permobil M300

Handling

Driving - General

Make sure that the control system is mounted securely and that the joystick

position is correct. The body part that you use to operate the joystick should be

supported, for example by the wheelchair arm pad. Do not use the joystick as

the sole support for your hand or limb - wheelchair movements and bumps could

upset your control. Make sure the wheel lock release lever is fully pushed into

the chassis (wheel locks NOT released).

Switch on the power by pressing the start button on the control panel.

2. Choose profile - VR2 Control system

The control system is normaly not programmed with more then one profile,

but in special applications this can occur. In these cases choose a suitable

profile with the profile/maximum speed button, see page 32.

Choose profile - R-net Control system

Choose a suitable profile with the profile button (if the control system is pro-

grammed with more than one profile), see page. 40.

Carefully move the joystick forward to drive forward, and backward to drive

backward.

The speed of the wheelchair is adjusted continuously by the joystick

being moved different distances forward and backward respectively. The

wheelchair’s electronics allow very slow driving over edges (max. 2.75 in.

You can drive up to the edge, and then carefully drive over it.

Содержание ConnectMe M400















































































































Результаты поиска

Содержание ConnectMe M400

Отзывы:

Permobil ConnectMe M400, Руководство пользователя, Страница: 62 / 110

Результаты поиска

Содержание ConnectMe M400

Отзывы: