Permobil Chairman Robo PG8, Руководство по обслуживанию

Страница: 30 / 40

Changing the fuses
30
Fuse box
80 A main fuse
Fuses
1 2 3
Fuse box
Remove the lid of the fuse box.
Replace any blown fuses. Refit the lid of the fuse
box, refit the rear cover and screw it in place.
The fuses in the fuse box have the following
functions:
1. Seat lift/lights/24 V switched 15 A
2. 24 V direct 15 A
3. This fuse has various functions depending on
the cable in the chassis.
Charging fuse 15 A (cable 306858-00-0)
Loop (cable 308737-00-0)
NB. The loop must not be removed.
Changing the fuses
In order to be able to change the fuses, you must
remove the rear cover. Unscrew the five screws
and lift off the cover. Ensure that the rear light
cables in the rear cover are firmly attached to the
electronics (connector).
Main fuse
The main fuse must only be changed by persons
with good knowledge of the wheelchair.
NB. If the main fuse blows, it often means that
there is a major electrical fault. The cause should
be investigated carefully before a new fuse is
inserted.
Change the main fuse and refit the rear cover.