Permobil Chairman HD3 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 52

Permobil Chairman HD3 Скачать руководство пользователя страница 29

Owner’s Manual Chairman HD3

Handling

- 29-

Fig. 43. Steering

4. The speed of the wheelchair is regulated proportionally by moving the joy

stick forwards or backwards to different extents. The wheelchair's
electronics make it possible to move slowly over curbs and other obstacles.
You can drive up to the curb or obstacle and then carefully drive over it.

When you drive down an obstacle or a steep slope, you must drive slowly
and brake gently. The maximum speed should be set to low speed. You can
brake gently by pulling the joystick back to a position just before the neutral
position. When the speed has been reduced, you can let the joystick go.

NB! The wheelchair can´t be driven if the seat is raised. You can only drive if the
seat is in its lowest position. Raising the seat lift raises the center of gravity and
increases the risk of tipping.

Steering

The wheelchair can be turned in the required direction by moving the joystick to
one side or the other while driving forwards or backwards

«
...
27
28
29
30
31
...
»

Содержание Chairman HD3





















































Отзывы:

Нет отзывов