Permobil Chairman HD3 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 52

Permobil Chairman HD3 Скачать руководство пользователя страница 19

Owner’s Manual Chairman HD3

Design and Functions

- 19-

Fig.22. Leg support active

Fig.23. Seat lift

Fig.24. Seat tilt

Fig.25. Backrest angle

Leverman

(Joystick manager)

With the help of the Leverman, you can use
the joystick to control the speed of the chair
(5 positions), seat lift, backrest angle, seat
angle and leg support, if your chair is so
equipped. These are all the functions that
are normally controlled from the push-
buttons on the seat control panel.

Operating the Leverman

1. Switch the start button on the control-

panel to ”on”.

2. Press the MODE button. The battery

indicator lights and the speed selector
lights flash. Step the speed range up or
down by moving the joystick right or left.

3. Press MODE to move through the

program. The right footplate lights.
Now you can move the leg support out
or in by moving the joystick forwards or
backwards.

4. Move the joystick to the left twice and

the seat lamp will come on. Moving the
joystick forwards or backwards will raise
or lower the height of the seat.

5. Move the joystick to the right and both

the seat and backrest lamps light. This
means that seat tilt is active, and can
be controlled by moving the joystick
forwards or backwards.

6. Move the joystick to the right and the

backrest lamp comes on. The backrest
angle is stepless, and is adjusted by
moving the joystick forwards or backwards.

7. Press the MODE button again. The

program ends and the chair is ready to
drive.

«
...
17
18
19
20
21
...
»

Содержание Chairman HD3





















































Отзывы:

Нет отзывов