background image

Owner’s Manual Chairman 2k/2s Lowrider

Maintenance and Repairs

Page 39

Page 39

Changing the batteries

Fig. 36. Main switch hole,

chassis cover knob.

Fig. 37. Battery cover knob

1. Put the wheelchair on a level surface.

2. Switch off the main switch, which is 

accessible through a hole, 36:1, in 
the chassis cover.

3. Loosen the chassis cover a little by

unscrewing the knob, 36:2, that 
holds the cover.

4. Open the battery covers by loose-

ning the knobs, Fig, 37, and drop 
the covers down.

5. Use the battery straps to pull each

battery completely out, Fig. 38.

6. Loosen the battery connections.

Positive (+) poles first then the
negative (-) poles.  Also look at the
stickers on the inside of the battery
covers.

7. Lift the batteries away.

8. Put in two new batteries, using the

battery straps. Leave the straps on
the new batteries.

9. Connect the battery cables, first 

the negative (-) poles and then the
positive (+) poles.

10. Lock the battery covers and then

the chassis cover.

11. Switch on the main switch.

1

2

Fig. 38. Pulling out the batteries

Содержание Chairman 2k Lowrider





















































Отзывы: