Permobil C350 Скачать руководство пользователя

Страница: 16 / 112

Owner´s Manual Permobil C350

Safety Instructions

Safety Instructions

Driving with Seat Lift/Seat Tilt/Backrest Recline

Be careful in making sure that nothing gets stuck between the chassis and

the seat when the seat lift/seat tilt is operated. Operating the seat lift,seat tilt/

backrest recline changes the center of gravity and increases the risk of tipping

over. Always drive in low speed and only use those seat functions on level

ground, and not on hills, ramps, slopes or other inclines. Using those seat func-

tions while driving on inclines can lead to personal injury and property damage,

including damage to the wheelchair.

Center of Balance

The possibility of this wheelchair tipping and the point where this wheelchair

will tip forward, back or to the side depends on its center of balance. Please

CAUTION that the following factors can affect the wheelchair’s center of bal-

ance:
• Elevation of the seat

• Height and angle of the seat

• Body position or weight distribution

• Driving on an incline such as a ramp or a hill

• Use of a backpack or other accessories, depending on the amount of

weight added.
If your wheelchair begins to move in an unexpected manner, immediately

release the joystick to stop the wheelchair. Except in an emergency, do NOT

use the on/off button to stop your wheelchair, as this will cause the wheelchair

to stop abruptly and may cause personal injury.

Fixed seat post

Adjusting the seat height may only be performed by an authorized service

provider. See the service manual for more information.

WARNING

Содержание C350

















































































































Результаты поиска

Содержание C350

Отзывы:

Похожие инструкции для C350

Бренды по названию

Популярные бренды

Permobil C350, Руководство пользователя

Результаты поиска

Содержание C350

Отзывы:

Похожие инструкции для C350

Бренды по названию

Популярные бренды