CLEANING AND MAINTENANCE
Regular and careful cleaning helps your infrared heater to operate efficiently for many trouble-free
years.
To clean your heater, please follow the steps below:
1. Unplug the power cord for your safety before cleaning your heater.
2. Make sure the heater is cool before continuing
3. To keep the heater clean, the outer should be cleaned with a soft, damp cloth. You may use a mild
detergent if necessary. After cleaning, dry the unit with a soft cloth. (CAUTION: DO NOT let liquids
enter the heater)
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
5. DO NOT immerse the heater in water
6. Wait until the heater is completely dry before use.
Storage: Store the heater in a cool, dry location when not in use to prevent dust and dirt build up. Use
packaging carton to store.
Troubleshooting:
A) When heater will not turn on:
1. Check if the power cord is plugged into an electrical outlet, if not, plug it in.
2. Make sure power outlet has power running through it.
B) LED light is on but no heat.
1. Click the power setting button of heater to Low or Hi position.
