Permaquip Kubota RRV, Руководство пользователя

Страница: 10 / 56

MAN-M-O-190_13 09/10/2014 Page 10 of 56
4.1. Oil Specifications
The recommended oil for the hydraulic failsafe braking system is:

Anti-wear hydraulic oil with an ISO viscosity grade 46.
Ensure that any alternatives used are to the same specification.
The specifications for the lubricants used within the Kubota itself can be found within
the
Kubota Operator’s Manual. However a brief summary of these are shown below:
Grease
Multi-purpose grease NLGI-2 or NLGI-1 (GC-LB).
Transmission oil
Oil for the transmission case, front axle case, knuckle case, hydraulic pump and
power steering to be Kubota UDT or Super UDT fluid. Alternatives are not
recommended.
Brake fluid
Kubota DOT3. Alternatives are not recommended.
Engine oil
Oil that meets API Service Classification CD, CE or CF.
Use a SAE30, SAE10W-30 or 10W-40 above +25°C.
Use a SAE20, SAE10W-30 or 10W-40 between 0 and +25°C.
Use a SAE10W or SAE10W-30 below 0°C.
Engine Coolant
Fresh clean water with anti-freeze that is suitable for aluminium engines.
4.2. Battery Specifications
The vehicle has been fitted with an additional battery. The specification is:

Valve regulated lead acid, AGM, 12v, 42Ah
Replacement batteries must be to the same specification. If either of the batteries
are charged at any time, then ensure that a suitable 12v multi-stage charger, that
can accommodate wet lead acid and AGM batteries, is used.