PERLICK RESIDENTIAL
RS-CDK
INSTALLATION INSTRUCTIONS
perlick customer service (800)558-5592 |
9
INSTALLATION
Insert end of the snorkel up into the tower and screw air
scoop mounting bracket into vacated holes above the fan.
6.
Install the Air Scoop Kit. Start by removing the upper set of
screws located above the fan on the back wall of the cabinet.
Assemble components from the kit as follows – Insert black
snap bushing into air scoop mounting bracket, then insert
one end of the air snorkel through the snap bushing. A zip
tie can be inserted behind the mounting bracket to keep the
tube in place.
NOTE: For Adara Towers, the air snorkel consists of a 3 inch
piece of black tubing and a 3 inch piece of clear tubing that
slides over each other and then is clamped using included
worm drive clamp. The black tube is inserted per the above
instructions and secured with the included zip tie. The clear
tube is installed over the air “T” from the dispensing head and
secured with the included worm drive clamp. See Figure 4 on
page 5 for illustration.
4.
5.