PERLICK RESIDENTIAL
RS-CDK
INSTALLATION INSTRUCTIONS
perlick customer service (800)558-5592 |
3
INTRODUCTION
Model Number: _____________________________________
Serial Number: _____________________________________
Purchase Date: _____________________________________
Dealer Name/Address:
__________________________________________________
__________________________________________________
__________________________________________________
Phone Number: ____________________________________
C
US
IMPORTANT!
Read and understand all information in this manual before attempting the installation. All plumbing
and electrical work must be performed by a qualified technician and conform to all applicable state
and local codes.
CONGRATULATIONS
Congratulations on your purchase of a Perlick high quality
residential Beer Dispenser. Perlick has proudly manufactured
beer dispensing systems for over 50 years for bars, restaurants,
stadiums, arenas and large venues around the world. That same
technology is used in each and every residential beer dispenser
we produce, assuring you’ll pour fresh, cold beer as the brewery
intended it to be enjoyed.
All Perlick products are built with commercial grade stainless
steel, providing you with the beauty and durability for a lifetime
of use. This installation guide will show you how to properly
install the dispensing equipment on your Perlick Beer Dispenser.
We dedicate considerable time to ensure that our products
provide the highest level of customer satisfaction. If, however,
service is required, call Perlick at 800.558.5592. For your own
protection, never return merchandise for credit without our
approval.
We thank you again for selecting a high quality Perlick Beer
Dispenser. Cheers!
IMPORTANT!
The installation of the actual beer dispens-
er cabinet should happen prior to installing
the dispensing equipment. Refer to the
Installation Manual that accompanied the
Beer Dispenser for step-by-step installation
of the cabinet.
Keep CO2 cylinder away from heat.
Rupture disc vents at 122°F maximum.
Allow only properly trained and
experienced personnel to handle high pressure gas.
Do not drop or throw regulator or
CO2 cylinder.
Do not apply oil to the regulator!
PLEASE NOTE
The following instructions are for both the
Draft Arm (standard tower) and the Adara
Signature Beer Tower. Some photos and
drawings may only show the Draft Arm, but
the instructions will also apply to the Adara
Signature Beer Tower unless noted.
DANGER
!
DANGER
!
WARNING
WARNING