Perlick HP24BS, Руководство по эксплуатации и установке

Страница: 13 / 28

13
Operation & Installation Manual
Signature Series (HP24 and HP48 models)
DOOR OPTIONS
Perlick residential units offer a variety of door panel design
alternatives; solid stainless steel, solid wood overlay, glass with
stainless steel trim and glass with wood overlay trim.
Solid stainless steel and stainless steel glass doors are shipped from
the factory with decorative stainless steel panels and handles in
place on the appliance.
Solid wood overlay and glass wood overlay doors are designed to
accept a decorative front panel to match surrounding cabinetry
and door handles. The panel and door handles are supplied by the
customer.
All Perlick units accept any of the above door configurations and
are fully interchangable.
I MPORTANT NOTE: Units with a freezer only can utilize a solid
stainless steel door, solid wood overlay door, solid stainless drawers
or wood overlay drawers (stainless steel glass or wood overlay
glass doors will sweat if installed on a freezer section).
I MPORTANT NOTE: Glass with stainless trim and glass with wood
trim may sweat in conditions with relative humidity over 75%.
WOOD OVERLAY INSTALLATION
Before beginning installation, check all components for proper fit
and finish.
WARNING
• All overlay doors require a trim panel of at least 3/4” thick.
• The solid wood overlay panel should not weight more than
20 pounds.
• The glass wood overlay panel should not weight more than
10 pounds.
The following instructions cover installing a solid wood overlay or
glass wood overlay panel and handle to a door or drawer.
IMPORTANT NOTE: Contact the factory or visit www.
bringperlickhome.com for full size wood overlay panel layouts.
Once on the site, select ‘Service and Support’ from the top menu
bar and click on ‘Wood Overlay Templates’. Take care in chosing the
correct template for your specific model.
I MPORTANT NOTE: You must install optional lock and handle
PRIOR to mounting the wood overlay onto the door frame.
Panel drawings:
Refer to Figure 13 for solid wood overlay panel (page 14).
Refer to Figure 14 for glass wood overlay panel (page 15).
Refer to Figure 15 for drawer wood overlay panel (page 16).
Door Lock Installation (optional)
When installing to wood overlay, perform lock installation before
mounting wood overlay to door.
1. See Figure 12 (below), attaching mounting bracket to wood
overlay.
2. Insert lock body and attach with nut.
Lock installation drawings:
Refer to Figure 16 for Lock Installation on solid wood overlay panel
(page 17).
Refer to Figure 17 for Lock Installation on glass wood overlay panel
(page 18).
Refer to Figure 18 for Lock Installation on drawer wood overlay
panel (page 19).
Mounting bracket
Screw
Lockwasher
Lock strike
Nut
Lock bracket
Lock body
Figure 12 - Lock installation