PERLICK RESIDENTIAL INSTALLATION MANUAL
12
perlick.com
WOOD OVERLAY INSTALLATION
(FOR -2 AND -4 MODELS)
Before beginning installation, check all components for
proper fit and finish.
Scan the QR code to the right
with your smart phone to watch a
detailed how-to video on installing
a wood overlay panel onto Perlick
doors. Otherwise, follow these
written instructions.
All overlay doors require a trim
panel of at least 3/4” thick. The
solid wood and glass wood panels should not weigh
more than 10 lbs
.
1. With the unit secured in position, open the door and
make sure panel pre-drilled holes align with door frame
holes.
2. Loosely attach four corners of overlay panel to the door
using #10 x 1” wood screws, installed through the door
frame from the rear.
3. Check for overall wood overlay panel fit, position, and
function. Make minor adjustments as necessary. When
panel is properly aligned, tighten mounting screws
securely. Install the rest of the mounting screws and
tighten securely.
Do not overtighten wood overlay
attachment screws, as this may
damage the factory supplied door frame.
CAUTION
CAUTION
WINE RACK TRIM (OPTIONAL)
All wine reserve racks come with sleek stainless steel fronts.
Unfinished solid hardwood fronts are optional and can be
removed and replaced with other wood to match your
cabinetry. See Figure 18 and 19 for wine rack face details.
NOTE: The unfinished faces should be finished and sealed.
In many cases, stains and/or finishes have odors that
may be objectionable in an enclosed area. Do not stain
or finish wood faces while installed on unit. To remove
the front wood face from the wine shelf, simply pull out
the wine shelf and remove the fasteners, finish as desired,
and when completely dry, reinstall with fasteners.
Figure 19. Wine Rack Trim, 24” models
Figure 18. Wine Rack Trim, 15” models
