Console port CLI access
Out-of-band command line access via Cisco compatible RJ45 serial
console port using common “rolled” CAT5 cable.
Console port can be enabled ( default ) or disabled.
Concurrent management sessions
Run multiple management sessions simultaneously for multiple
users.
Inactivity timeout
Protect secure management sessions by setting an inactivity timeout
value.
Alert event reporting
Alert level events are stored in the local event log and sent as:
SNMP traps to up to 4 servers
SYSLOG messages to a SYSLOG server
Email to user defined email address
Advanced IP feature set
IPV4 and IPV6 address support
DHCP
DNS
Dynamic DNS
NTP
TFTP
Telnet
SSH V2 and V1
HTTP
HTTPS
Advanced Management User
Authorization and Accounting with
primary and secondary server
support
RADIUS
LDAP
Active Directory via LDAP
RSA Secure ID-agent or via RADIUS authentication
Kerberos
NIS
Encryption
AES (256/192/128), 3DES, DES, Blowfish, CAST128,
ARCFOUR(RC4), ARCTWO(RC2)
Hashing Algorithms: MD5, SHA-1, RIPEMD160, SHA1-96,
and MD5-96
Key exchange: RSA, EDH-RSA, EDH-DSS, ADH
X.509 Certificate verification: RSA, DSA
Access Control List
An access control list can be created which can filter out only those
workstations that are authorized to access the management
resources. Filter on IP and/or Ethernet MAC addresses.
Network Services Filter
Enable only those network services on the management module that
are allowed on your network ( Telnet, SSH, HTTP, HTTPS, SNMP ).
