Perle PoE/PoE+ 10/100/1000 Ethernet Media Converter
Installation Guide
12
Duplex copper (Switch 4)
Switch Position
Copper port 1 Copper port 2
Up (default)
Full Duplex
NA
Down
Half Duplex
NA
Note: When Auto Negotiation (SW1) is set to Off, the media
converter will use this Duplex setting for copper port 1.
Full Duplex: In the Up switch position; the media converter will be set to Full
Duplex mode.
Half Duplex: The media converter will be set to Half Duplex mode.
Speed copper (Switch 5)
Switch Position
Copper port 1 Copper port 2
Up (default)
100
NA
Down
10
NA
Note When Auto Negotiation (SW1) is set to Off, the media
converter will use this switch setting for copper port 1 speed.
100: When Switch 5 is in the Up position, the S-1110P will force the speed to 100
Mbps.
10: When Switch 5 is in the Down position the media converter will force the speed
to 10 Mbps.
Auto Fiber Negotiation (Switch 6)
Switch
Position
Fiber 1
1000 Mbps
Fiber 2
1000 Mbps
Up (default)
Auto
Auto
Down
Off
Auto
Auto:
The Media Converter will negotiate Ethernet parameters on the fiber
connection. This will ensure that the most optimal connection parameters will be in
effect. If connecting to another Perle Media Converter, this parameter should be
set to Auto. The Media Converter Module will advertise 1000Mbps, Full and Half
Duplex, no Pause.
Off:
The Media Converter Module’s fiber will be fixed to 1000Mbps, Full Duplex.
Note: Fiber port 2 is always set to Auto.
