32
Perle IRG5410/5410+Series Router Hardware Installation Guide
Appendix C - Mounting the IRG5410
Option Two
1. Attached the two DIN Rail screws to the holding plate. The DIN Rail can be positioned either
with the snap on connector in the down or up position on the holding plate. See diagram below.
2. Slide the two screws into the holding plate, then attached that holding plate to the IRG5410. See
below.
3. Position the IRG5410 router such that the top hooks of the DIN rail clip attach onto the top of the
DIN rail.
4. Rotate the bottom of the IRG5410 towards the rail. This will snap the bottom hooks of the DIN
rail clip onto the bottom of the DIN rail.
