Perle 10/100/1000 Media Converter Module – Installation Guide
10
(A) Loses fiber connection on its receiver.
(A) Disables fiber transmitter.
(B) Detects loss of link on its fiber receiver.
(B) Drops link on copper connection because Smart
Link Pass-Through is configured.
(A) Link on copper connection is not affected because
Smart Link Mode is set to Standard.
Duplex copper (Switch 4)
Switch
Position
Mode
Up (default)
Full
Down
Half
Note: When Auto Negotiation (SW1) is set to Off, the
Media Converter will use this Duplex setting for its
copper connection.
Up: The Media Converter Module will be set to Full
Duplex mode.
Down: The Media Converter Module will be set to Half
Duplex mode.
Speed copper (Switch 5)
Switch
Position
Mode
Up (default)
100
Down
10
Note When Auto Negotiation (SW1) is set to Off, the
Media Converter Module will use this switch setting for
its Ethernet copper speed setting.
Up: The Media Converter will be fixed at 100 Mbps.
