In most cases, stopping the engine will not be
necessary because of an intermittent code. However,
the operator should retrieve the logged fault codes
and the operator should reference the appropriate
information. in order to identify the nature of the
event. The operator should log any observation that
could have caused the lamp to light.
• Low power
• Limits of the engine speed
• Engine vibration or engine noise
This information can be useful to help troubleshoot
the situation. The information can also be used for
future reference. For more information on diagnostic
codes, refer to the Troubleshooting Guide for this
engine.
i05142533
Configuration
Parameters
System
configuration
parameters
affect
the
emissions
of
the
engine
or
the
power
of
the
engine.
System
configuration
parameters
are
programmed
at
the
factory.
Normally,
system
configuration
parameters
would
never
change
through
the
life
of
the
engine.
System
configuration
parameters
must
be
reprogrammed
if
an
Electronic
Control
Module
(ECM)
is
replaced.
System
configuration
parameters
are
not
reprogrammed
if
the
ECM
software
is
changed.
For
more
information,
refer
to
Troubleshooting,
“System
Configuration
Parameters”.
SEBU9075-03
45
