09931294C
18
NOTE:
When you press the mode key, power adjustment mode is displayed. The power settings should be set to
P 25.
NOTE:
The default power set is 50. Whenever turning the main switch on or off, you should set the power to 25.
Figure 36 Power set to 25
Lambda 465 Installation
NOTE:
The maximum ambient temperature is 50ºC in air and water immersed. The operation with over 50 ºC
temperature will damage the stirrer head.
NOTE:
The Power Setting for setting the DistriBox4to 25. Whenever turning the main switch on or off, you
should set the power to 25. [The default power set is 50]
NOTE:
Two Stirrer control cable should be connected via the DistriBOX4.
NOTE:
Stirrers should be connected in pairs: [Position 1+1B] or [Position 2+2B]. The single stirring connection is
not supported.
CAUTION
ATTENTION
Make sure the instrument is turned off while installing this accessory.
Assurez-vous que l’instrument est éteint lors de l’installation de cet
accessoire.
Figure 37 Stirrers
