Performax 241-0991, Руководство оператора

Страница: 14 / 20

Page 13
OPERATION
1. Disconnect the saw from the power
supply.
2. Make sure that the workpiece is firmly
anchored: clamp the workpiece to keep
it from slipping or moving while cutting.
3. Use the appropriate type and size of
blade for the workpiece material and
size.
4. Install the blade into the tool.
5. Adjust the pivot shoe as necessary to
make sure that the blade will extend
beyond the shoe and through the
workpiece at all times.
6. Adjust the pivoting shoe as necessary
to expose unworn blade teeth for longer
blade life.
7. Check for clearance behind the
workpiece so that the blade will not
contact another surface.
8. Plug the reciprocating saw into an
electrical outlet.
9. If the blade is inserted with the teeth
facing downward, hold the tool as
shown in Column A, resting the edge of
the shoe on the workpiece. If the blade
is inserted with the teeth facing upward,
hold the tool as shown in Column B,
resting the edge of the shoe on the
workpiece.
10. With the blade just above the workpiece,
switch on the tool; allow it to come to
the desired speed. Then, using the edge
of the shoe as a pivot, lower the blade
into the workpiece.
11. As the blade starts cutting, raise the
handle of the tool slowly, until the shoe
rests firmly on the workpiece.
12. After the blade has penetrated through
the workpiece, continue sawing along
the marked cutting line.
WARNING:
Risk of injury, don’t
plunge cut in metal.