Performax 10-20 PLUS, Инструкция по эксплуатации и каталог запасных частей

Страница: 6 / 24

6
Introduction
This manual is provided by Performax covering the safe operation and maintenance procedures for a Model
10-20 Plus Drum Sander. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. This machine has been designed and
constructed to provide years of trouble free operation if used in accordance to instructions set forth in this
manual. If there are any questions or comments, please contact either your local supplier or WMH Tool
Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.
Specifications
Stock Number ..................................................................................................................................... 628900
Max. Width (in) ..................................................................................................................... 20 (Two Passes)
Min. Length (in) .......................................................................................................................................2-1/4
Max. Thickness (in) ....................................................................................................................................... 3
Min. Thickness (in) ................................................................................................................................... 1/32
Drum (in) ...............................................................................................................5 x 10 Extruded Aluminum
Drum Speed (RPM)................................................................................................................................. 1700
Dust Chute (in) .............................................................................................................................................. 4
Conveyor Motor.....................................................................................43 inch-lb Torque, Direct Drive, D.C.
Conveyor Variable Feed Rate (FPM).......................................................................................................0-12
Motor (TEFC) ................................................................................................................1 HP, 1Ph, 115V only
Net Weight (lbs) .......................................................................................................................................... 74
The specifications in this manual are given as general information only, and they are not binding. WMH
Tool Group reserves the right to effect, at any time and without prior notice, changes or alterations to
parts, fittings and accessory equipment deemed necessary for any reason whatsoever.