Date: 30.06.2004
Manual
Revision: 0
DEMON US
Page: 30
Performance Variable e.K. Am Tower 16, D-54634 Bitburg
27 & 28)
Place your free hand carefully
under the bundle. Swing it out slightly so
that the lines stay taut and gently lay it on
the floor.
29)
As it lies on the floor, the bundle
should be triangular in shape, as shown.
Note: The slider should be wrapped up in
the tail and should stay that way as you
stuff the canopy into the deployment bag.
30)
Dress canopy to a width slightly
wider than the bag. All the slider should
stay inside the rolled tail. The slider must
not be allowed to move down the lines—
even the smallest downward movement of
the slider may increase opening shock and
decrease reliability. Pay extra attention to
the position of the slider until the bag is
closed.
31 & 32)
Move to the side of the can-
opy and put one hand right under the
slider edge of the bundle. Place the other
hand on top a little farther up and make a
small S-fold as shown. Be sure the slider
stays up against the stabilizers; don’t let
it move down the lines.
