Date: 30.06.2004
Manual
Revision: 0
DEMON US
Page: 29
Performance Variable e.K. Am Tower 16, D-54634 Bitburg
22)
Reach down and pick up the very middle
point of the trailing edge; an identification
marker is sewn at the middle point to help you.
Raise the tail a couple inches above the slider
and hold it in place with the same hand that is
holding the lines.
23)
On one side, start with the middle of the
tail being held under your thumb and pull the
excess material straight out. You're pulling out
the trailing edge of the canopy that extends
from the inside steering line to the very center
of the trailing edge.
24)
Wrap
that part of the tail half way around
the canopy. Hold in place with your knees.
Fold the tail on the other side of the canopy
the same way.
25 & 26)
Release your knee grip on the nose
and tail. Take both tail pieces in one hand and
roll them together into the middle so they com-
pletely encase the rest of the canopy.
CAUTION:
The steering lines must stay positioned at the
back of the canopy as shown in Fig. 21. If
the steering lines are moved to the nose of
the canopy (rather than being kept at the
back), a line-over malfunction and canopy
damage may result.
