PARTS LIST
TOOLS REQUIRED
ASSEMBLY INSTRUCTIONS
10
6
1
3
2
5
4
7
8
9
1. Place the top tray upside down on a flat surface.
2. Position one of the L-bar frame legs on the inside of the brackets on the
tray. NOTE: The tear drop shaped holes should be on the longer side of the
tray, with the larger circle portion of the openings facing down.
3. Use a large screw, washer and nut to fasten the L-bar frame legs to the top tray
brackets on both sides.
4. Place the base on the end of the legs, with the legs inside the brackets on the
base, and fasten with a large screw, washer and nut.
5. Place the bottom bin support bracket on the bottom set of holes in the legs.
6. Align the holes in the base support brackets with the threaded holes on the
base, and holes in the legs. Fasten the top holes with a large screw, washer
and nut. Fasten the bottom holes with two small machine screws.
7. Insert remaining bin support brackets on to the legs. Make sure the 3 holes in
the support bracket are closer to the top.
8. Align the vertical support bracket with the bolts on back of the bin support
brackets, and lock into place.
No. Description
Qty.
1 Base 1
2 Base Support Brackets 2
3 L-Bar Frame Legs 2
4 Bin Support Brackets 7
5 Vertical Support Bracket 1
SPECIFICATIONS
NOTE: Specifications are subject to change without notice.
Small Red Bins: ........................................................ 32 (5-1/2 x 3-1/4 in.)
Large Blue Bins: ..............................................................15 (8-1/4 x 5 in.)
Rack Height: ............................................................................... 45 in. Tall
Rack Width: ............................................................................. 37 in. Wide
Rack Depth: .............................................................................12 in. Deep
Construction: ...........................................................Powder Coated Steel
Replacement Parts No. W5193HW ............... Hardware kit (Nuts & Bolts)
No. Description
Qty.
6 Top Tray
1
7 Large Machine Screws 18
8 Round Washers
18
9 Hex Nuts 18
10 Small Machine Screws 2
• #2 Phillips head screwdriver
• 10 mm wrench or socket and ratchet
