Performance Tool M656, Руководство пользователя

Страница: 4 / 4

PARTS LIST
3
2
1 12
11
13
14
15
16
17
18
25
21
26
27
28
29
30
30
39
38
37
35
34
10
4
5
6
7
9
8
19
20
21
22
23
24
40
28
33
32
36
INDEX DESCRIPTION QTY INDEX DESCRIPTION QTY
1 Housing 1
2 Muffle Cover 1
3 Hosing Adaptor 1
4 Trigger 1
5 Trigger Pin 1
6 Safety Pin 1
7 Fixed Ring 1
8 Safety 1
9 Spring 1
10 Valve Bushing 1
11 O-Ring 1
12 O-Ring 1
13 Valve Stem 1
14 Spring 1
15 Air Regulator 1
16 O-Ring 1
17 Nut O-Ring 1
18 Nut 1
19 Rear Bearing 1
20 Rear Cover 1
21 Fixed Steel Ball 2
22 Cylinder 1
23 Rotor Blade 4
24 Rotor 1
25 Washer 1
26 Fixed Steel Ball 1
27 Front Cover 1
28 Front Bearing 2
29 Bevel Gear 1
30 Connect Nut 1
31 Clamp Nut 1
32 Angle Head 1
33 Grease Valve 1
34 Angle Bearing 1
35 Bevel Gear 1
36 Key 1
37 Drive Shaft 1
38 Fixed Nut 1
39 Collet 1
40 Collet Nut 1
INSUFFICIENT POWER:
Probable Cause Solution
Dirty or clogged air passages ......... Flush and lubricate tool, drain air tank and supply line
Insufficient air supply ...................... Increase line pressure, Make sure compressor
matches tool's air pressure and consumption needs
Air leakage...................................... Use PTFE tape at all fittings and joints. Check tool for
worn or damaged O-rings & seals.
Worn/damaged wear & tear parts ... Replace as necessary.
Tool matching ................................. Be sure you are using a tool suited for the torque
requirements of the job at hand.
TROUBLESHOOTING
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail
purchasers. These warranties give specific legal rights. Except where prohibited by local law, the
law of the State of Washington governs all warranties and all exclusions and limitations of
warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and
workmanship under normal use and service. A defective product may be returned for a free
replacement within 90 days from the date of purchase, provided that product is returned to place of
purchase immediately after discovery of defect. After 90 days and up to one year from date of
purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination
shall disclose to be defective and under warranty. These warranties shall be valid only when a
sales receipt showing the date of purchase accompanies the defective product or defective part(s)
being returned. For part(s) after 90 days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables
which must be replaced under normal use and service. These warranties shall not apply to any
product or part which is used for a purpose for which it is not designed, or which has been repaired
or altered in any way so as to affect adversely its performance or reliability, nor shall these
warranties apply to any product or part which has been subject to misuse, neglect, accident or wear
and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume
any liability in connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE
TOOL® makes no express or implied warranties of any kind with respect to its products. In
particular, PERFORMANCE TOOL® makes no implied warranty of merchantability and no implied
warranty of fitness for any particular purpose, except that for goods purchased primarily for
personal, family or household use and not for commercial or business use, PERFORMANCE
TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an implied
warranty of fitness for a particular purpose), but only for the particular qualities or characteristics,
and for the duration, expressly warranted above. The laws on limitation of implied warranties may
differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages
resulting from or in any manner related to any product, or to the design, use, or any inability to use
the product. The sole and exclusive remedy for a defective product or part shall be the repair, or
replacement thereof as provided above. The laws on limitation of remedies or on consequential,
incidental or special damages may vary from state to state, so the above limitations may not apply
in all cases.
© Copyright 2016 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138