Performance Tool E30-001, Инструкция по сборке

Страница: 4 / 5

4
Step 3.
Put the roller assembly (1) on the stand
assembly and connect them with two hex
bolts and washers (5). Use the hex key to
tighten the hex bolts as show in Fig 4.
Step 4.
NOTE: You can adjust the height of the stand
with the adjustment handle by turning
counter-clockwise to loosen.While
loose, raise the roller assembly to
desired height and turn adjustment
handle clockwise to tighten in place
as shown in Fig 5.
NOTE: Set the roller assembly parallel
with the leg assembly to support a
longer work-piece more firmly.
ASSEMBLY INSTRUCTIONS CONT.
Fig. 4
Fig. 5 Fig. 6