Performance Tool E30-001, Инструкция по сборке

Страница: 3 / 5

IMPORTANT SAFETY INFORMATION
WARNING - The use of any accessory or attachment other than one recommended in this
instruction manual may present a risk of personal injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator. Read and understand all
of the instructions provided in the instruction manual as well as any other tool (s) used
with the roller support stand.
Use hex key provided.
Step 1.
Remove the pins from the leg assembly (3)
and insert the pins into the holes of the stand
assembly (4) as shown in Fig. 1. Connect the
leg assembly (3) and stand assembly (4) with
the hex bolt as shown in Fig 2. Use the hex
key to tighten the hex bolt, make sure the leg
assembly is locked firmly as shown in Fig 3.
Repeat this step with the other leg assembly (3).
ASSEMBLY INSTRUCTIONS
PARTS DESCRIPTION
1 Roller Assembly
2 Height Adjustment Handle
3 Leg Assembly
4 Stand Assembly
5 Hex kex & Hardware
Fig. 1
1
2
3
4
5
Fig. 2
Fig. 3
3