6
Unit Controls
Panel Cover
A cover conceals the controls for Pulse Width, Pulse Rate, Mode Selector and Modulation
Selector. The TENS dial controls are very easy to use and the flip cover protects accidental
changes in settings.
Intensity
The intensity knobs located on the top of the unit affect the strength of the stimulation and
also function as ON/OFF controls.
Mode
The Mode switch is used to select the type of treatment utilized.
The three modes are Burst (B), Continuous (C), and Modulation (M).
Pulse Width
The Pulse Width knob regulates the pulse width for both channels.
Pulse Rate
The Pulse Rate knob regulates the number of pulses per second for both channels.
Mode Functions
Burst (B)
releases individual bursts twice per second, pulse width is adjustable and the
pulse rate is set at 100Hz per second.
Continuous (C)
stimulation is delivered continuously at the settings determined by
intensity, rate, and width knobs.
Modulation (M)
pulse width decreases from its setting by 60% and maintains the decreased
width for 2 seconds before returning to the original width setting, which is maintained for
3.5 seconds. The cycle is then repeated. The intensity and pulse rate are adjustable.
Time Control
Treatment Time of TENS can be preset with timer control. This switch has 3 positions: 30,
60 minutes and C (continuous). Push the mode selector until engaged in position desired.
