Performa Racing Crawler Combo, Инструкция по эксплуатации

Страница: 12 / 16

12 Copyright Performa Racing © 2019
SETTINGS
Standard parameters can be modified using the setup
button located on the switch.
Running mode
1. “Forward Only with Brake” this mode is meant for racing.
In this mode the car can go forward and brake, there is
no reverse.
2. “Forward/Reverse with Brake” in this mode the car can go
forward, brake and reverse. If the car is moving forward
and you go into reverse, the car will first brake and
stop, then you need to release the throttle and go into
reverse again for the car to go backwards. While braking
or in reverse, if you accelerate, the car will immediately
accelerate forward.
3. “Forward/Reverse”
This mode is meant for Rock Crawlers. In this mode there
is no brake function, the car goes from forward to reverse
or reverse to forward immediately without any pause
Note: Do not use this mode with other car types as it can
overload and/or damage the ESC.
Drag Brake Force
Sets braking power applied when the throttle is returned
at the neutral position. A higher drag brake setting means
stronger hold or hill brakes.
Note: stronger brakes cause more load on the drivetrain
and heat output will be increased, use with caution.