Performa Racing Crawler Combo, Инструкция по эксплуатации, Страница: 11 / 16

www.performaracing.com 11
To modify the “advanced” parameters, the use of the
optional program box is mandatory!
Standard parameters setup using the setup button
located on the switch.
A. Switch on the ESC.
B. Press and hold the setup button until the green LED starts
flashing and then release the setup button (holding the
setup button for 5 seconds will restore the ESC to factory
defaults).
C. Press the setup button once more.
D. The green LED starts flashing repeatedly, indicating the
currently selected parameter. One flash = parameter 1,
two flashes = parameter 2 and so on. Press the button to
switch between the different available parameters.
E. To change the setting of the actual parameter, press and
hold the setup button until the LED starts flashing red.
F. The red LED flashes indicating the actual setting. One
flash = setting 1, two flashes = setting 2 and so on. Press
the button to switch between the different available
settings.
G. Press and hold the setup button for 3 seconds to save the
modification.
H. Switch the ESC off and back on to make the parameter
change effective.
Note: you can only change one setting at a time, after each
modification you need to switch the ESC off and back on to
make the parameter change effective and be able to modify
another parameter.