Perfelli DNS 6793 B 1100 LED Strip, Руководство пользователя

Страница: 29 / 35

- Use the pipes with 120-150 mm diameter.
- Install the flexible aluminum pipe on the outlet of the cooker hood. Install the other end of
the pipe to the chimney hole on the wall (Pic. 10).
Since the bends and elbows will cause reduction in air excessive and bents must be avoided
elbows as much as possible (Pic. 11).
4.4 INSTALLING THE ALUMINUM PIPE
5. CONTROL PANEL
Pic. 10 Pic. 11
Pic. 12 (a)
Hood DNS 6793 B 1100 LED Strip is equipped with a sensor control without display
(Pic. 12 (a)).
- Press the light button once in order to turn on/off the lighting.
- Pressing the 1 button starts to hood blower at the 1
st
speed and the 1 button becomes
lighten. Pressing the same button again when it is light, turns off the hood.
- Pressing the 2 button starts to hood blower at the 2
nd
speed and the 2 button
becomes lighten. Pressing the same button again when it is light, turns off the hood.
- Pressing the 3/i button starts to hood blower at the 3
rd
speed and the 3/i button
becomes lighten. At a 3 speed blower installed hood, pressing the same button again
when it is light, turns off the hood. At a 4 speed blower installed hood, pressing the 3/I
button again increases the blower to the 4
th
(intensive) speed. The 3/i button light will start
to flash and will turn back to 3rd speed automatically after 7 minutes. Pressing the 3/I
button before this 7 minutes period will turn off the hood completely.
Pressing and keeping pressed for 2 seconds any of the 1 – 2 – 3/i buttons will activate
the timer function. In this mode hood will operate at the pressed button speed and will
automatically turn off completely after 15 minutes.
29