PerfecTron ROC236A, Руководство пользователя

Страница: 24 / 30

Console redirection settings The settings specify how the host computer and the remote computer (which
the user is using) will exchange data. Both computer should have the same or compatible settings.
4
.4.6.1 Console redirection settings
Out-of-Band Mgmt Port VT-UTF8 is the preferred terminal type for out-of-band management. The next best
choice is VT100+ and then VT100. See above, in Console Redirection settings page, for more help with
terminal type/emulation.
Bits per second Selects serial port transmission speed. The speed must be matched on the other side. Long
or noisy lines may require lower speeds.
Flow Control Flow control can prevent data loss from buffer overflow. When sending data, if the receiving
buffers are full, a ‘stop’ signal can be sent to stop the data flow. Once the buffers are empty, a ‘start’ signal
can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop signals.
4
.4.7 Intel 82579LM Gigabit Network Connection/ Intel 82574L Gigabit Network Connection
Configure Gigabit Ethernet device parameters
NIC Configuration Click to configure the network device port.
Blink LEDs (range 0-15 seconds) Blink LEDs for the specified duration (up to 15 seconds)