9
10
GETTING STARTED
Installation using THE "SET-UP WIZARD"
Place Perfectpro Audisse on a flat surface and plug the cable from the mains adaptor
into the DC input socket located at the rear of Perfectpro Audisse (marked 'DC in')
ensuring that the plug is pushed fully into the socket. Plug the mains adaptor into a wall
socket and switch on the socket.
IMPORTANT: The mains adaptor is used as the means of connecting the radio to the
mains supply. The mains socket used for the radio must remain accessible during
normal use. In order to disconnect the radio from the mains, the mains adaptor should
be removed from the mains socket outlet completely.
When you apply power, the display on the sound system will light up.
After a few seconds the radio will then enter Standby and the clock will display '00:00' as
shown.
To continue to setup Perfectpro Audisse press the
Power button
. If this is the first time
that you use Perfectpro Audisse (or after a Factory Reset) the display will show 'Setup
wizard' and 'YES' will be highlighted on the screen.
Press the
Tuning/Seek/Select
control
to select 'YES' and to begin setting up Perfectpro
Audisse.
The Language menu will be shown on the screen for you to select your preferred
language. By default Perfectpro Audisse will display all menus and messages in English.
Rotate the
Tuning/Seek/Select control
until the desired language is highlighted on
the screen. Press the
Tuning/Seek/Select control
to select the chosen language
option. The set up procedure will be continued with Date/Time menu shown up with your
desired language.
Next, the way in which the radio updates its clock is set. A menu allowing you to specify
the auto-update option for the clock will be shown. The 'Update from Network' or “Update
from DAB” option will be good for most users.
Rotate the
Tuning/Seek/Select control
to highlight the time zone for your current
location. Press the
Tuning/Seek/Select control
to enter the setting.
GB
