Rotate the
Tuning/Seek/Select control
to highlight 'Enable' and press the control. The
display will show the Frequency options for the alarm. The alarm frequency options
are as follows: 'Off' - the alarm will be disabled 'Daily' - the alarm will sound everyday
'Once' - the alarm will sound once 'Weekends' - the alarm will sound only at weekends
'Weekdays' - the alarm will sound on weekdays only. Rotate the
Tuning/Seek/Select
control
to choose the required alarm frequency option. Choosing Off will disable the
alarm. Press the control to confirm the selection. If you choose to set the alarm to Once
you will also need to set the date using the
Tuning/Seek/Select control
.
The alarm can be set to buzzer, Internet radio, DAB radio or FM radio. For whichever
radio mode is selected, the radio alarm may be set to any of the stations, which have
been stored as presets or to the station most recently listened to. Rotate the
Tuning/
Seek/Select control
to highlight the current 'Mode' option for the alarm, then press the
control
if you wish to change it. Rotate the
Tuning/Seek/Select control
to highlight
either 'Buzzer' or the required radio mode. Press the
control
to confirm the selection.
If setting the alarm to a radio option, rotate the
Tuning/Seek/Select control
to highlight
the 'Preset:' option then press the
control
if you wish to change it. Choose from either
the radio station 'Last listened' to, or from the presets 1 - 40. Scroll to the chosen option
and press the
control
to confirm the selection. Note that you can only set the alarm to
use a preset which has already been stored.
Rotate the
Tuning/Seek/Select control
until the 'Volume:' option is highlighted on
the display and press the
control
if you wish to change it. The sound system uses
the saved volume setting for each alarm when it sounds. Rotate the
control
to set the
required volume and then press the
control
to confirm the setting.
In order to store the alarm settings rotate the
Tuning/Seek/Select control
until
'Save'
is highlighted. Press the
control
to store the alarm settings. Your radio will show
'Alarm
saved'
and will then go back to the list of alarms with the new alarm setting shown in
the display. If you decide not to save the settings, press the
Back button
. The display
will show
'Save changes'
with a
'YES'
or
'NO'
option. Rotate the
Tuning/Seek/Select
control
to choose
'NO'
and then press the
control
.
'Alarm not saved'
will show on
the display. Active alarms are shown using small alarm indicators at the bottom of the
playing displays and on the clock display when in standby.
GB
33
34
