Perfect Multi-Gym Pro, Руководство пользователя

Страница: 11 / 19

10
STEP 2 - Installing the Safety Clip
After the Multi-Gym
®
Pro has been
adjusted to fit the doorway,
remove it from the doorway
and install the Safety Clip.
a) On the inside of the doorway,
place the Safety Clip above
the molding in the center at
the top of the door.
b) Slide the pointed end between
the wall and the molding. Push
downward until Safety Clip is
flush against the molding.
Reinstall the Multi-Gym
®
Pro
in the doorway.
Completed Installation
You can reinstall the Multi-Gym
®
Pro in the doorway once the Safety Clip is installed.
When properly installed, the Multi-Gym
®
Pro will fit in the doorway as shown below.
Connecting
Bar
Safety
Clip
Molding
Inside of
Doorway
(hinged side)
Side View
View from Inside Doorway
Connecting
Bar
Wall
Molding
Left and Right
Bar Assembly
Hand Grip
Grey
Foam
Front
Safety Clip
Molding
Pointed
End
Door
Hinges
Inside of
Doorway
(hinged side)
b
a
When attaching the Multi-Gym
®
Pro to a door frame, make sure the Safety Clip is
securely attached to both the molding and Multi-Gym
®
Pro. Failure to follow this
instruction may result in serious injury or death.
Remove the Multi-Gym
®
Pro from the door frame when not in use. If the product is moved
to a different door, you must recheck the fit and adjust the product to fit the new doorway
if necessary. Failure to follow these instructions may result in serious injury or death.