5. Operation Instruction
P.7
Infrared Thermometer
TM0819
6. Attention
The object being measured must be larger than the vision field of the instrument.
Keep the object surface clean and free from frost, oil and dirt etc. when measuring.
If the object's surface is reflective, cover with adhesive tape or black paint before measuring.
If the object is transparent such as glass it may not have an accurate result.
Steam, dust, smog etc. will influence the measuring result.
This instrument can adjust the environment temperature deviation. But if the deviation is huge it may take
about 30 minutes to adjust.
To find the hot spot please point the object from top to bottom and from left to right until found.
When it shows low power signals "LOG", please replace battery (9V). The battery is located under the trigger.
Properly dispose of the battery.
5.9 Battery replacement
