4. The LCD shows the initial information and then enters main
function.
5. Release button.
6. Make sure the auto power off symbol disappears from display
screen.
6.2 REC BUTTON
Press button to start recording data. The REC symbol will display
on the screen. To stop recording, press button again.
6.3 T1T2 BUTTON
Push this key to display T1-T2 at
the 3rd column on LCD.
(please refer to Fig.1)
6.4 MAX/MIN MODE ONLY FOR CHANNEL T1
Under this mode, the unit simultaneously monitors and stores the
maximum, minimum and average value in the memory. The unit will
keep updating/refreshing the data.
To start:
1. Press button. MAX symbol lights up on LCD, the reading shows
the maximum data.
2. Press button again to show minimum data; the MIN symbol
lights up on LCD.
Fig.1
6. OPERATION INSTRUCTIONS
P.8