This section will explain how to store data (data logger) in memory and
how to recall data from memory.
7.1 SETTING INTERVAL TIME FOR DATA STORING
1. Turn off the unit.
2. Enter SETUP mode by pressing and holding
button and then press power
button to turn on the unit. “SEt ” blinks on
the LCD screen. (see Fig.5)
3. Press button to set storing interval.(see
Fig.6)
4. Press
▲
( ) or
▼
( ) to adjust the
minute, press button again to adjust
second.
5. When finished, press button to exit
SETUP mode.
Note: During the setting process, press
button anytime to cancel and exit.
7.2 START DATA LOGGER STORING DATA IN THE MEMORY
1. Press button to start data logger (storing the measured values
in built-in memory).
2. REC symbol lights up on LCD screen.
3. Press button again to stop recording.
Note: During recording period, most of the buttons are disabled,
such as the , , etc. All other settings must be made before
starting the data logger function.
Fig.5
Fig.6
7. DATA LOGGER
P.12