19
Halogen Lights
Light Operation Instructions
1. Make sure the light’s power switch on the control panel is in the
“OFF” position
2. Connect power plug to properly grounded outlet.
3. Turn the light’s power switch to “ON”.
Halogen Bulb Replacement
1. Make sure that the grill has cooled before changing the light
bulb.
2. Make sure the light’s power switch on the control panel is in the
“OFF” position and power plug is disconnected from the outlet.
3. Use a Phillips screwdriver to loosen the screw securing the light.
4. Remove the light bulb housing.
5. Remove the glass cover from the light bulb housing.
6. Use a flathead screwdriver to loosen the two screws locking the
bulb in place. Pull out the light bulb and replace with a new bulb.
Tighten the two screws.
Note:
Do not touch the halogen bulb
with bare hands.
WARNING
Keep any electrical supply cord away from any heated surface.