Estimated Assembly Time: Approximately 5 minutes
Required Tools: Phillips Screwdriver
Insert the side burner to the orifice and tighten it.
Then insert the igniter wire the hole on below side burner igniter.
WARNING
1. Attach the coupling half (socket) to the gas supply line in accordance with ANSI Z223.1/NFPA 54 FUEL
gas code.
2. Prior to inserting the plug, test the connection for leaks following the leak test instructions on page 13.
After the leak test is completed, rinse the connection with clean water to remove any corrosive residue.
3. Do not use open flame to test for leaks.
8
3. Side Burner Hose Quick Disconnect Assembly
4. Side Shelf Handle Assembly
Estimated Assembly Time: Approximately 5-7 minutes
Required Tools: Phillips Screwdriver (not included)
Remove the four side shelf handle screws from the side
of the shelf.
Align the holes in the side shelf handle with the holes in
the shelf.
Insert the screws and tighten.
G R
I
L L
I N
G
S
U
P
E
R I
O
R
B
U
I L
T
F
O R