Perfect Flame 720-0533 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 32

Perfect Flame 720-0533 Скачать руководство пользователя страница 26

16

MAIN

BURNERS

1-2

Operation of the Burners

Press Activation Button (MAIN BURNERS 1-2) and
hold for 3 seconds to turn ON/OFF the burners.

17

Adjusting the Flame

Press “HI” and “LO” Button (MAIN BURNERS 1-2) to
adjust the flame. The Flame-Indication Lights will show
the level of the flame. A beep will sound every time
the flame is adjusted.

18

Turning ON the Burners

Once a burner is started, the flame will be maximized,
and all Flame-Indication Lights will on. After 6 seconds,
the flame will be set to normal (Level 3), 3 Flame-
Indication Lights will on, and a beep will sound.

19

Turning OFF the Burners

Flame will be quenched, all Flame-Indication Lights will
off, and 3 beeps will sound.

20

Lighting of the Burners

If a burner can not be ignited in 20 seconds, the system
will closed the valve, 3 beeps will sound, and all the
Flame-Indication Lights will flash. The burner need to
be turned off and reignite again if uses.

21

Flame Sensing of the
Burners

Igniter will stop igniting if it senses flame.

22

Reigniting the Burners

If the flame is accidentally quenched, the burners will
be needed to turn off and reignite again.

23

MAIN

BURNERS

3-4

Operation of the Burners

Press Activation Button (MAIN BURNERS 3-4) and
hold for 3 seconds to turn on/off the burners.

24

Adjusting the Flame

Press “HI” and “LO” Button (MAIN BURNERS 3-4) to
adjust the flame. The Flame-Indication Lights will show
the level of the flame. One beep will sound every time
the flame is adjusted.

25

Turning ON the Burners

Once a burner is started, the flame will be maximized,
and all Flame-Indication Lights will on. After 6 seconds,
the flame will be set to normal (Level 3), 3 Flame-
Indication Lights will on, and a beep will sound.

26

Turning OFF the Burners

Flame will be quenched, all Flame-Indication Lights will
off, and 3 beeps will sound.

27

Lighting of the Burners

If a burner can not be ignited in 20 seconds, the system
will closed the valve, 3 beeps will sound, and all the
Flame-Indication Lights will flash. The burner need to
be turned off and reignite again if uses.

28

Flame Sensing of the
Burners

Igniter will stop igniting if it senses flame.

29

Reigniting the Burners

If the flame is accidentally quenched, the burners will
be needed to turn off and reignite again.

26

«
...
24
25
26
27
28
...
»

Содержание 720-0533

































Отзывы:

Нет отзывов