7
STEP 3
Line up holes of Red Foam and
Lower Body Support. Press in 2
of the Plugs through both parts.
IMPORTANT:
Before assembling the Back Blade,
make sure that the Weight Sticker is
facing down. Failure to do so can
damage your unit.
STEP 4
NOTE: When attaching the
Back Blade make sure the
Number Sticker (1) is facing
up (as shown) and matches
the number on the Body Pad.
b. Slide the Back Blade into
the Slot in the plastic on
the Body Pad.
STEP 5
The Back Blade will come out under
the Foam just before the Lower Body
Support. Continue pushing the Back
Blade until it locks into the 1st Lock.
You will hear and feel the Back Blade
lock into the 1st Lock.
lower Body support
hole
red
Foam
hole
Plugs
Back Blade
weight sticker
Back Blade
(make sure weight sticker
faces down)
slot
Body Pad
1
1
1
1
a
b
Back Blade
slot
Body Pad
Plastic
Back
Blade