5
Connections
Connect Power
Caution:
- Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
- Before connecting the AC power cord, ensure
you have completed all other connections.
Connect the AC power cord to:
- the AC~ socket on this unit.
- the wall socket.
Connect to External Audio Device
Using AUX IN socket
- Use a RCA to RCA stereo audio cable(not
included) to connect the TV’s audio output
sockets to the
AUX(R L)
socket on the unit.
Preparations
Prepare the Remote Control
The provided Remote Control allows the unit to
be operated from a distance.
• Even if the Remote Control is operated within
the effective range (6m), remote control
operation may be impossible if there are any
obstacles between the unit and the remote
control.
• If the Remote Control is operated near other
products which generate infrared rays, or if
other remote control devices using infrared
rays are used near the unit, it may operate
incorrectly. Conversely, the other products
may operate incorrectly.
Replace the Remote Control Battery
1 Use a needle to push the battery forward
through the hole on rear of remote control.
2 Remove the old battery.
3 Place a new CR2025 battery with correct
polarity (+/-) as indicated.
4 Then install the battery into remote control.
Precautions Concerning Batteries
• When the Remote Control is not to be used for
a long time (more than a month), remove the
battery from the Remote Control to prevent it
from leaking.
• If the batteries leak, wipe away the leakage
inside the battery compartment and replace
the batteries with new ones.
• Do not use any batteries other than those
specified.
• Do not heat or disassemble batteries. Never
throw them in fire or water.
• Do not carry or store batteries with other
metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
• Never recharge a battery unless you are
ceratin that it is a rechargeable battery.
