Perfect Aire PORTQ12000 Скачать руководство пользователя страница 13

10

 IMPORTANT

1.  Be sure to unplug the unit before cleaning or servicing.
2.  Do not use gasoline, thinner or other chemicals to clean the unit.
3.  Do not wash the unit directly under a tap or using a hose. It may 

cause electrical danger.

4.  If the power cord is damaged, it should be repaired by an 

authorized repairman.

CAUTION:

 

DO NOT

 operate the unit without filter because dirt and

lint will clog the unit and reduce performance.

 1. AIR FILTERS

Clean the air filters at least once every two weeks to prevent inferior 

fan operation because of dust.
• 

REMOVAL:

 This unit has three filters. Take the filters out according 

to Fig. 27.

• 

CLEANING:

 Wash the air filters by immersing them gently in warm 

water (about 104°F/40°C) with a mild detergent. Rinse the filters 

and dry them in a cool, dry place.

• 

MOUNTING:

 Reinstall all three filters before operating the unit.

 2. UNIT ENCLOSURE

Use a lint-free cloth soaked with mild detergent to clean the unit 

enclosure. Finish by using a dry, clean cloth.

 3. UNIT IDLE FOR A LONG TIME

•  Remove the rubber plug on the back of the unit and attach a 

hose to drain outlet. Place the open end of the hose directly over 

the drain area in your basement floor or over a shallow pan (if no 

floor drain is available.) (See Fig. 23 & 24.) Remove the plug from 

the bottom drain outlet; the water in the bottom tray will drain 

out. (See Fig. 26.) Carefully tilt unit back slightly to assist with 

water drainage from bottom drain outlet.

•  Keep the appliance running on FAN mode for half a day (12 

hours) in a warm room to dry the appliance inside and prevent 

mold from forming.

•  Stop the appliance and unplug it. Wrap the cord around the 

power cord buckle and insert plug into power plug socket for 

storage. Remove the batteries from the remote control.

•  Clean all air filters and reinstall them.
•  Disconnect the exhaust hose and keep it in a safe place.  

Cover the window hole or remove slider kit from the  

window completely.

•  Remove the batteries from the remote control. 
•  Be sure to store the unit in a cool, dark place. Exposure to direct 

sunshine or extreme heat can shorten the lifespan of the unit. 

CARE AND MAINTENANCE

CAUTION

Clean air conditioner occasionally to keep it looking and operating like new.  

Be sure to unplug the unit before cleaning to prevent shock or fire hazards.

Lower Filter A 

(Press the grille 

down slightly 

and pull the 

lower filter A 

out at the  

same time.)

Upper Filter 

(take out)

Lower Filter B 

(take out)

FIG. 27

Содержание PORTQ12000





















Отзывы: