Perfect Aire 3PATW14002, Руководство пользователя

Страница: 10 / 28

7
WALL SLEEVE BRANDS:
#1 PERFECT AIRE, WHITE
WESTINGHOUSE, FRIGIDAIRE,
CARRIER 52F SERIES
16 IN. & 17½ IN. DEEP
1. Remove existing rear grille and replace with provided
louvered panel. Install as shown here.
NOTE: You may need to drill holes in flange of existing
sleeve to match new rear grille.
2. Attach (1) 1
ʺ
x ⅜
ʺ
x 25
ʺ
long seal in the center at the
top of the sleeve. Remove the backing paper and press
into position.
3. Attach (2) 1
ʺ
x ⅜
ʺ
x 14
ʺ
long seals to the left and right
sides of the sleeve.
4. Attach (1) 1
ʺ
x ¾
ʺ
x 14
ʺ
long seal vertically 4.5
ʺ
from the
left side of the sleeve. Attach the other 1
ʺ
x ¾
ʺ
x 14
ʺ
long
seal 4
ʺ
from the right side of the sleeve.
5. Center unit and gently slide unit into sleeve.
6. Before sliding all of the way back, remove second screw
from front on left side of the unit.
7. Remove the plastic washer from the screw.
8. Screw and attach the other end of the ground wire to
the unit as shown in picture. Make sure that the toothed
washer is against the cabinet.
9. Slide the unit completely to the rear to ensure a
good seal, making sure the ground wire does not
become tangled.
10. Seal & frame the unit as described on page 17.
11. If you have difficulty with mounting the grille to the
sleeve, follow the instructions for direct mounting on
page 16.
REAR LOUVERS
4.5
ʺ
4
ʺ
80° 80°
80°80°
30° 30°
TOP VIEW
4.5
ʺ
4
ʺ
2
3
4