3
When removing air filter, do not
touch metal parts of the unit.
Doing so may cause an injury.
.
Cleaning unit when power is ON
may cause fire and electric shock
and may cause an injury.
Operation with windows open may
cause moisture to enter the room.
Stop operation and close the
window in severe storms or
hurricanes.
Do not clean with water.
Water may enter the unit and
degrade the insulation causing an
electric shock.
This could injure the pet or plant.
Failure to do so may cause electric
shock and damage.
Do not put a pet or house plant
where it will be exposed to
direct air flow.
Hold the plug by the head of the
power plug when taking it out.
Ensure proper ventilation
especially in rooms with a stove
or other appliances.
Failure to do so may result in an
oxygen shortage.
This unit is NOT intended to
preserve precision devices, food,
pets, plants, and art objects. It may
cause deterioration of quality, etc.
Leaving power on may cause unit
failure or fire.
Use only as intended.
If unit will not be used for a long
period of time, turn OFF main
power switch.
If water enters the unit, turn the unit off at the power
outlet and switch off the circuit breaker. Isolate supply
by taking the power-plug out and contact a qualified
serviced technician.
Obstacles may cause appliance
failure or accident.
Cleaners or detergents may change
the color or scratch the surface of
the unit.
Do not place obstacles around
air-inlets or inside of air-outlet.
Use only a soft cloth to clean
the unit.
Prolonged exposure to outdoor
elements may cause damage to
installation bracket causing unit to fall.
There is danger of electric shock.
Periodically check installation
bracket for damage.
.
Operation without secured filters
may cause failure. A dirty filter
can cause the unit to not run efficiently.
Water from unit contains
contaminants and could cause
illness.
Always insert the filters securely.
Clean filter AT LEAST once
every two weeks.
NEVER drink water drained from
air conditioner.
Unit and Circuit breaker/fuse
must be switched OFF when
cleaning.
Do not place heavy objects on the power cord
and always ensure that the cord is not
compressed.
Use caution when unpacking
and installing.
Sharp edges could cause injury.
!
!
!
!
!
!
!
!
!
!
!
There is danger of fire or electric shock.
!
CAUTION
Electrical Shock and
Personal Injury Hazard
Meeting Electrical Requirements
WARNING
!
• Electrical ground is required on this appliance.
• DO NOT ground to a gas line.
• If cold water pipe is interrupted by using plastic, non-
metallic gaskets, or other insulating materials. DO NOT use
for grounding.
• Check with a qualified electrician if you are in doubt as to
whether the appliance is properly grounded.
• DO NOT modify power supply cord plug. If it does not fit the
outlet, have a proper outlet installed by a qualified electrician.
• DO NOT have a fuse in the neutral or grounding circuit.
A fuse in the neutral, or grounding circuit could result in an
electrical shock.
• DO NOT use an extension cord with this appliance.
Failure
to
follow these instructions could result
in electrical shock, serious injury, or death.
Observe all local governing codes and ordinances.
Do not, under any circumstances, remove the power
supply cord grounding prong.
NOTE:
If codes permit, and a separate grounding wire is used,
it is recommended that a qualified electrician determine that the
grounding path is adequate and not interrupted by plastic,
non-metallic gaskets, or other insulating materials.
Receptacle Wiring
Receptacle wiring should be a minimum of 14 gauge. Use copper
wire only. It is your responsibility to provide proper and adequate
receptacle wiring, installed by a qualified electrician.
Electrical Requirements
A time delay fuse or time delay circuit breaker is also required. A
separate circuit, serving only this appliance, MUST be provided.
